Are Fabric Displays The Game Changers That You Have Been Waiting For?

Pop up stands have been there for ages – in fact, you yourself may have used them at a couple of shows. They are good, aren’t they, but then they do have their share of disadvantages, some of which you may have experienced first hand.

– Have you ever dragged behind a 30kg pop-up stand while walking down a crowded city street, on your way to the exhibition venue? Or did you rather get it transported? If that’s a yes, did the transportation cost add to your already inflated exhibit marketing budget? Either way, wouldn’t you prefer something lighter for a change? Something that weighs far too less?

– What do you usually do when the pop up stand gets all dirty? Just wipe off with a sponge? Easier said than done, dirt and grime are okay, but could a sponge help you with the marks that result from general wear and tear? Not really. The display could use some real-time washing, if not in one of those regular or industrial washing machines, then at least by hand, if it’s way too soiled to be used at your next show.

– If you have been exhibiting for quite some time now, chances are that you already know how to assemble a pop-up, but if you are a first-timer, aligning the graphic panels could be an ordeal. Assembling a pop up stand is no rocket science, agreed, but then a little comfort never hurt anyone.

– Have you ever wondered why the back of your stand doesn’t look attractive as the front? Perhaps you do know that using more than one pop up a stand would serve the purpose, but can you really afford? Shouldn’t you opt for something with a greater deal of flexibility? Makes sense?

– Good or bad, pop up stands won’t vanish into thin air – just not yet. They are affordable, especially in comparison to other available options.

However, if you do decide to splurge a bit more, go for fabric displays – they win hands down – weighing just about 9kgs, these displays are easy to wash, can be assembled without much difficulty even if you have had no prior experience, and let you pull off a 360 degree display – basically, they are the perfect solutions to whatever challenges you face with pop up displays (including the ones already discussed).

And if your designer prints through the fabric using a heat-transfer technique instead of printing on-top of it, you could always use the stand for many more shows to come – the design won’t fade away or crack easily – win-win!

Why Hire an Exhibition Design Company

Some Things Are Better Left To Professionals. Exhibition Design Is One Of Them!

An exhibition can be quite draining; after all, there’s a lot involved, and with all work that it takes, your peace of mind could go for a toss. So unless you are the poster boy of “jack of all trades, master of none,” it’s advisable to delegate or rather outsource some or all of the work to those who can take care of it in a much better way. Take the exhibition design for example; it may sound cliche, but a design company would do a better job than you will. Here’s why:

They would have the team for it: Your booth designers won’t do everything on their own; they’ll have a team of experts, all well-versed with the nitty-gritty of designing a booth, and that team will complete the work in much lesser time. And time is money, right? Also, they are likely to dedicate different resources (read: people) to different aspects of the design, and eventually everything will be taken care of.

Your satisfaction is their success story: You’ll be looking forward to making a lasting impression at the show and attract the maximum number of visitors, while they’d work in the background to impress you. They ought to – for the sake of professionalism, for all the money that’s involved, and more importantly, to prove their mettle. If you are satisfied with the design they come up with, you’d either give them repeat business or spread the word or do both. Either way, they are in a win-win situation and they’d strive hard to put you in one.

They’ll have the technical know-how: Unless you choose a newfangled one, chances are that the design company is already well-versed with the technology needed to make your booth stand out. They’ll be upfront about what works and what doesn’t and whether or not your ideas and suggestions can be backed by technology. They’ll give you the real picture; it’s important to think big, but it’s even more important to get a reality check. Of course, if they go the extra mile and make the impossible possible, kudos!

Eleventh-hour changes will be the least of your worries: While it’s expected of an exhibition design company to take note of all the possible failure points right, in the beginning, there’ll be some unseen challenges along the path, and some would even pose a threat at the very last minute. You may panic, but the designers won’t; they would rather keep you prepped up all along. Also, if you have any impromptu suggestions just before the show, they’ll look into the possibility of implementing them.

You won’t be all by yourself: It can get lonely out there, especially before and after the trade show. A design company would visit the exhibition venue to supervise the installation, and once you are done, to dismantle it. They’ll take their carpenters and workmen along for their on-site supervision, thereby keeping everyone in the loop and ensuring that nothing gets missed. In fact, it’s a good idea to ask them to visit the venue because they should be familiar with the theme of the exhibition you are participating in – that’s how they can choose the most appropriate colors and graphics.

The point made: you need a design company for peace of mind, for total satisfaction, for on-site supervision, and for support. But, how do you find one? Well, there are many around, but you must zero in on the one that sets high-performance standards, respect your budgetary constraints, has an impressive portfolio to show, is open to feedback and has a key stake in making the trade show a big hit for you. You may also want to look at their partners and/or suppliers, and find answers to questions like where does the A/V equipment come from, just saying.


Make The Right First Impression At Your Next Trade Show; The Visitors May Not Give You A Second Chance

Whether an upcoming trade show would be your first or the 100th you’ll be participating in, you cannot take things for granted. Making a killer impression may have been easy at your last exhibition, who’s to say that the next one won’t turn into a big disappointment? You got to get it right; there’s no other option. Here’s how you treat every show differently and prep up:

You play by their rules and take the back seat for once: Well, it’s your show, agreed, but the organizers may have some rules in place. Respect them. When broken, the very same rules will show you in a bad light, flushing all your efforts down the drain. It’s not about losing control, but making their rulebook a reference point won’t hurt, while you are busy getting the booth designed and sending over the invites. And yes, if the event warrants a dress code, stick to it.

If you ignore the audience, they’ll play hard to get: Your booth design should be in sync with your target audience or better still, in sync with their mindset(s). Of course, it’s very much your booth, but you are out there exhibiting for the audience. For instance, if you are targeting the millennials, something old-fashioned would hardly be enticing; they’ll be more than happy to give your booth a miss. On the other hand, if your stand figuratively shouts that it’s youth-oriented, they’ll come in hoards and bring along more people than you expect to handle. The youth, in general, is impressionable; act while you can.

Don’t be so full of yourself: Imagine coming across a booth where the staff is all making merry – someone’s eating, others are drinking, while the rest of them are too busy to talk to you and would rather engage in a telephonic conversation; would you rather not head over to another booth? Exactly! The visitors will do the same. Do you get the drift?

Be messy at your own peril: Is the “scribbled-all-over” notepad from yesterday’s event still at your front desk, or have you been naive enough to hide the giveaways in plain sight? Either way, you would succeed in making the first impression, but a really bad one. Hide the clutter. Don’t obstruct the view of the audience or knowingly give them distractions to look at, while you make every possible move to divert their attention to your products and offerings.

Don’t be caught unaware: You want the visitors to come over to your booth, right? Then act like it. Prepare your staff for face-to-face interactions and have an elevator speech handy. Use technology in a possible way and do anything and everything you can to make it clear that you were expecting them indeed.

In the end, it’s all about understanding that there are other booths at the exhibition, and unless your first impression is good enough to lure the audience, you’d be losing out on quite a few leads. Be punctual, act like you know it all but be receptive to feedback because the visitors could be vocal about their experiences, and more importantly, start the preparations well in time.

Successful Exhibition Stands Have A Lot In Common. Learn And Adapt!

When at a trade show, the visitors may be busy finding answers to a different set of questions than you – while you may be busy qualifying leads, they are often seen wandering from one booth to another, spending merely 8-10 seconds before they decide to walk past – many are on the lookout for freebies, agreed, but others are just finding a good booth to be at. And how do they ultimately find one? Well, the answer lies within these constants:

Visuals That Attract

WYSIWYG – What You See Is What You Get, right? At least this is what the visitors believe; for them, if your stand looks good, you definitely have something good to offer, and once that’s been established, they’ll come in huge numbers. So, successful exhibition stands to invest in good visuals or graphics, whatever you want to call them. The idea is to stand out and attract the visitors; it really doesn’t matter if it’s a shell scheme or a custom stand, you can make it look good – you don’t necessarily need to break the bank, rather find a designer who can work around your budget and come up with a visually appealing stand.

No Ambiguity

Unsuccessful stands go overboard with the visuals and often miss out on the need for clarity, while the successful ones don’t. An architectural marvel is a sure shot way of attracting the visitors, but once they are there, they’ll spend only 3-4 seconds to digest the available information. And if within that timeframe, your visuals and/or signs fail to communicate what your business is about, they’ll leave.

Here’s what successful stands do to ensure that the visitors stop to find more:

– They make sure their copy is legible and more importantly, easy to understand. Technical jargon is a big no-no unless it’s an absolute necessity.

– They don’t overkill – 20 characters/5 words max per wall or something along similar lines. A bit too much information is a major put-off.

– They may embrace brevity but clearly communicate what all products and services they have on offer.

Valuable Literature

Once the visitors decide to stay, even if it’s for a short while, they must be provided with more information so as to pique their interest. While some stands bombard them with information, all thanks to the overzealous sales staff, out there to make a mark, others splash the walls with their entire knowledge bank. None of them succeed. The successful ones get leaflets/flyers printed for the visitors to take home. Some play smart and go digital with the information, providing the visitors with a link or QR code to fetch.

Samples or Discounts

Those who succeed at trade shows and exhibitions know what the visitors want; others do not. Successful stands are often flocked by visitors because they offer free samples. Those who are not able to do so because of the nature of their product(s), go the extra mile and give discounts. Either way, they are in a win-win situation.

No Place for Boredom

If your stand can keep the visitors entertained, it’s a success, if it can’t, it would fall flat – as simple as that. Trade shows can be quite tiring and some stands add to the anguish – with boring presentations and dry demos, they ward off the visitors sooner than expected. The successful ones, on the other hand, keep them entertained with virtual reality, gamification and what not.

Additionally, stands that succeed are manned by friendly staffers, and do not turn a blind eye to the needs of the mobility-impaired visitors; in other words, they are accessible to one and all. Success at trade shows is easy to achieve; some stands get the drift, while some don’t. Which side are you on?

A 3-Step Guide To Choosing The Right Spot For Your Trade Show Booth

More often than not, trade shows are driven by one common motive – getting the maximum number of people to visit. And when you have a booth out there, at any of these shows, that’s exactly what you aim at, right? Isn’t it because you know that the more traffic you drive to your booth, the better are your chances of collecting leads and acquiring new customers? You bet. So how do you do it?

– By decorating the booth and making it visually appealing?
– Or with promotional baits?

Either way, you may or may not succeed, unless of course, you have chosen the right spot for your booth, one that stands out and gives you an edge over the others. Location, location, location – that’s the endgame. You either find the right one or you lose. As simple as that.

Here’s how you grab the perfect spot:

1. By determining the amount of space needed:

–  Why are you exhibiting in the first place? What’s your objective?

– Are you there to merely showcase your products or would you rather be interested in engaging the visitors in one-on-one conversations, while ensuring that no two visitors overhear each other?

– And even if you are only displaying your products, how many of them do you plan to take along? Will your entire product line be out there for the visitors to see, as in would you be needing multiple display shelves?

– How many would salespersons/business partners/subject matter experts be accompanying you to the booth?

Find the answers to these questions, and once you are done, choose among the following:

– Island stands: open from all sides; have their share of advantages, including being inviting enough and allowing easier entry and exit; not so good for displaying multiple products, but if you are ready to get some free-standing furniture shipped, they are worth their salt.

– Inland stands: not as inviting as the island ones, but they have three walls, which offer maximum product exposure.

– Corner stands: perhaps the best of the lot; have two sides open and attract the visitors in large numbers.

– Tunnels: or walk-through stands, whatever you want to call them, well, these are positioned in a passage between halls, and should only be chosen if you are able to take advantage of two parallel sidewalls and open sides.

Letting go of the fear of congestion

High-congestion areas may be a big no-no for many exhibitors, but what they don’t realize is that conference and meeting rooms, restrooms, escalators, and elevators, and restaurants and food stands are flocked by all or most of the visitors and a booth in the vicinity is sure to garner attention. Make sure you don’t make the same mistake. Also, it’s a good idea to reserve a spot closer to any of the sponsored booths – these booths often have relaxation lounges, VR tours and games and other such facilities, and leave the visitors in a happy-go-lucky mood. If your booth is where they head to next, they would be more receptive to your pitch.

Reserving the spot early on:

Good spots go off the table without much ado. Act in time. And while you are it, ask for early-bird discounts. Don’t forget to keep your checklist handy though and avoid any of the spots that:
Are just below the air conditioning vents and can limit the height of your booth

– Have some red flags nearby. Spots in close proximity to fire alarms and extinguishers may fall prey to additional rules and regulations.

– Are next to narrow alleys, which don’t leave much room for visibility.

– Pre-show marketing and eye-catching visuals are all good, but if you are in the wrong spot, no one would come your way. Sad but true!